Not All Custom Putters Are Equal – True Custom Milled Putters
Each putter is a one off endeavor, milled specifically to your specifications. Clients can choose to have stamps, or engrave custom characters, sight lines, logos etc. The putters proudly and precisely milled right here in the U.S.A. to your specification.
Custom putters vary in completion time depending upon the scope and level of customization and finish options, and depending upon the complexity of the order, it can take up to 15 weeks to get the putter in your hands (if you can’t wait that long, please do not order). We unfortunately do not include progress pictures of our milling process. An optional CAD mock up is available to visualize the custom putter, as well as premium customization where you can change the fundamental geometry of the putter. In an effort to deliver putters as quickly as possible, we typically apply our best judgement on placement and sizing for some custom options. Due to the nature of being made to order, custom putters are not returnable or refundable.
We updated our ‘303’ head shape and have since defined it under our flagship Holliday namesake. The shape is still defined by softer lines at address but complimented with a subtle three plane sole. This is one of our few heads milled to 4 degrees of loft.
Standard Specs:
This iteration of our Holliday shape was our standard through 2016 and 2018, and is a classic heel toe weighted design featuring a more organic and rounded sole and bumpers. This shape is our take on a classic with a modern touch based on player feedback, featuring a slightly longer neck and heavier head weight compared to most blade putters.
Standard Specs:
The Carbon Holliday Long Neck is a classic heel toe weighted design featuring a more organic and rounded sole and bumpers. This shape is our take on a classic with a modern touch based on player feedback, featuring a the longest neck available in our single piece milled offerings.
Standard Specs:
The Carbon Holliday Flow Neck features a flow neck for those that prefer the smooth optics and heavier toe hang.
Standard Specs:
The Carbon Heavy Holliday is an early development in our history as a prototype for a touring professional. The head features a 415g head weight, which fits counter balance options well, or for those that prefer a heavier head weight. The longer neck promotes a slight arc putting stroke.
Standard Specs:
This is our early take on a highly demanded classic shape, defined by smoother aesthetics and a subtle three plane sole. The head weighs in at 350g with a wide cavity and a more heel based neck resulting in a 55 degrees toe hang.
Standard Specs:
The Carbon Ringo 1/4 is a classic heel toe weighted design with a three chambered sole. The Ringo 1/4 features a thick top line for a heavier head and a solid feel. The 1/4 long neck produces a more face balanced putter with slightly less toe hang. This model won the 2015 most accurate blade putter – per MyGolfSpy.com
Standard Specs:
The Carbon Ringo Long Neck is a classic heel toe weighted design that earned a silver in Golf Digest’s 2017 Hot List for blade putters. The longer neck provides more face balance than an average blade putter, promoting less arc in the putting stroke.
Standard Specs:
The Carbon Ringo is one of our favorite classic head shapes, weighing in at 365g with the characteristic three plane sole and 45 degree toe hang, full offset plumber’s neck. This head is available with weight variations, achieved by milling the back cavity deeper.
Standard Specs:
The Carbon Ringo Flow Neck is a classic heel toe weighted design with a three chambered sole. This is our Ringo head that took Golf Digest silver, with a flow neck for those that prefer the smooth optics and heavier toe hang.
Standard Specs:
The Carbon Ringo is one of our favorite classic head shapes, weighing in at 340g with the characteristic three plane sole and 45 degree toe hang, full offset slant neck. This head is available with weight variations, achieved by milling the back cavity deeper.
Standard Specs:
The Carbon Ringo Wide Flange features the same fundamental angles and shape of our Ringo with a wider flange, available in multiple variations of neck length and top line width. The head is one-piece milled like all Carbon putters, along with the company characteristic lower loft and heavier head weight than most similar putters on the market.
Standard Specs:
The Carbon Ringo Center Shaft is a classic shape with a no-offset center shaft position. The head is one-piece milled like all Carbon putters, with a small neck to allow for lie loft adjustments. This head shape is face balanced, promoting a straight-back-straight-through putting stroke.
Standard Specs:
The Carbon “Johnny” Ringo is a no-offset shafted head with the foundation of a Ringo. The shaft base is heel bias to produce a strong toe hang and clear view of the ball at address, while maintaining a one-piece milled construction and over the hosel shaft configuration that allows lie loft adjustments.
Standard Specs:
The Carbon Kid is a classic heel toe weighted blade. The kid is more toe heavy than many other blades, promoting more of an arc stroke path.
Standard Specs:
The Carbon Kid Flow Neck is a classic heel toe weighted blade. The kid is more toe heavy than many other blades, promoting more of an arc stroke path.
Standard Specs:
This head shape maintains a classic clean look with a full offset long neck that breaks free from tradition, giving it a 42 degree toe hang to stroke like a traditional perimeter weighted putter.
Standard Specs:
The Carbon Duke is a perimeter weighted heel shafted blade. The duke is comes one-piece milled like all Carbon putters, along with the company characteristic lower loft and heavier head weight than most similar putters on the market.
Standard Specs:
The Bandit is one of our first mallets developed, playing with a single bend shaft and full shaft offset. It is full face balanced with perimeter weighting promoting a stable straight back straight through stroke.
Standard Specs:
The Bandit is one of our first mallets developed, with this variation featuring a face balanced center shafted option. It is full face balanced with perimeter weighting promoting a stable straight back straight through stroke.
Standard Specs:
The Carbon Masterson Flow Neck is an original design made with the intent of a low profile and aesthetically clean mid mallet. The head is one-piece milled and features a high toe design to aid in proper alignment and hand positioning.
Standard Specs:
The Carbon Masterson Plumber Neck is an original design made with the intent of a low profile and aesthetically clean mid mallet. The head is one-piece milled and features a high toe design to aid in proper alignment and hand positioning.
Standard Specs:
Carbon Putters 7342 S. Alton Way Suite 7E Centennial, CO 80112 303.323.8739 shop@carbonputters.com
